Buckbuster Archery Laser Bow Sight Mounting Instructions

	OVERALL VIEW OF COMPONENTS1. Mounting Clamp with 4 screws for secure mounting to metal or plastic pin guard. 2. Dove-tail hinge for mounting laser housing (3) to mounting clamp (1). 3. Laser housing with 4 adjustment screws for elevation and left and right adjustments. Also houses 3 #393 batteries. 4. Sur-C Lens creates a holograph field from 10-50 yds. at night (with dot in center of field) so you can see your target.
	UNIVERSAL STYLE MOUNTING INSTRUCTIONS 1. Slide 2" pin into 1/4" hole of choice on sight bracket, or drill 1/4" hole of choice. 2. Secure with 1/4-20 washer & nut 3. Slide laser mount onto pin to desired position. Preferably aligned with sight pins (left and right). 4. Tighten lock screw on 2" pin to secure. NOTE: KEEP WIRE OUT OF ARROW PATH
	CLAMP STYLE MOUNTING INSTRUCTIONS 1. Attach laser clamping bracket to pin guard. 2. Position laser clamp on pin guard to desired position. 3. Tighten clamp screw to secure to mount. 4. Run switch wire in an out-of-the-way path to riser of bow. 5. Secure wire to front of riser for index finger with the provided velcro. NOTE: KEEP WIRE OUT OF ARROW PATH
	BATTERY INSTALLATION INSTRUCTIONS 1. Remove battery cap. 2. Place batteries into receptacle with negative (-) side inward & positive (+) outward 3. Battery cap must contact the positive (+) battery side. 4. Keep battery cap face and screw threads clean as they are parts of an electrical circuit. 5. Handle battery cap & receptacle carefully to avoid stripping or cross threading.
	PIN GUARD HORIZONTAL MOUNTING 1. Use rear adjusting screws, above & below hinge screw to adjust windage. 2. Use side adjusting screws to adjust elevation. PIN GUARD VERTICAL MOUNTING 1. Use side adjusting screws to adjust windage. 2. Use rear adjust screws to adjust elevation. NOTE: USE CAUTION WHEN SETTING ADJUSTMENTS